2014 New Design RFID Access Control Card Reader
Optional Model
D701A-26/34, (Black Color, 125khz EM ID wiegand 26/wiegand34 adjustable interface)
D701A-M26/M34, (Black Color,13.56Mhz MF wiegand26/wiegand 34 adjustable interface)
Specification
Wiegand 26bits/ Wiegand34bits Standard Format Data Output
Less than 0.2 second Response Speed
5-10cm Proximity Range
Ambient Temperature: -25º C to 75º C
Ambient Humidity: 10%-90%
Built-in Antenna
Built-in LED (Double Color LED)
Built-in Loud Speaker (Buzzer)
DC 9V-16V Working Voltage. Standard 12V, 70mA Working Current (if you need 5V,kindly contact Dwell Sales)
100 Meters Communication Distance
Real Time Data Transfer
With Water-Proof Function
Audiovisual indication: When a registered card is presented to the reader, the
LED flashes green and the beep sounds.
Package Detail
86*86*20(mm)
Package: 100pcs per carton. Carton Size: 43.5*56*23(cm)
Packing List:
1*RFID Reader
Installation Description
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 9V to 16V
Black GND
Green D0
White D1
Yellow BEEP
Blue LED
Grey Wiegand 26/Wiegand 34
Orange Door Bell
Grown Door Bell
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
