001M Wiegand 26/34, RS232, RS485 Proximity Card Reader
Specification
- Less than 0.2 second Response Speed
- Less than 0.5 seconds Proximity Time Distance
- 2-15cm Proximity Range
- Support EM-ID 125Khz and mf 1 Card (13.56 MHz Frequency)
- Built-in Antenna
- Built-in LED (Double Color LED)
- Built-in Loud Speaker (Buzzer)
- DC 12V Working Voltage,70mA Working Current
- 100 Meters Communication Distance
- Real Time Data Transfer
- Black Color
- PVC Case Material (Black Resin for Water-Proof Function)
- 119*54mm*25mm
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 9V-16V
Black GND
Green D0
White D1
Yellow BEEP
Blue LED
Grey WG34( Default is wiegand 26, if you need weigand 34, connect grey wire to GND)
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires
