Elevator control management
In the elevator, there are dozens of floor buttons, and only one card reader needs to be installed. The system operates based on the user's card permissions through judgment.
According to the user's permissions, the card can be swiped to reach the designated floor. If the user can go to multiple floors, after swiping the card, the customer presses the button for the floor they want to go to this time, and other buttons are pressed without permission.
If it is a security or other management personnel, after swiping the card, they can choose the floor they want to reach.
Note: Elevators are products with higher safety levels. When applying this equipment to elevator management, engineering companies must seek advice and permission from Party A and the elevator company.
Enabling management functions:
Card+password height mode can be used. (If the card is found or copied by someone, it cannot be illegally entered.)
It has time management control function. (It can set the time from which to when it can be effectively entered. The validity period of the registered card can be set.)
Power outage, fire alarm or emergency management function. (If the controller is powered off or fails, the system will automatically enter safety mode. For example, the elevator can automatically restore to the state of manually pressing the floor button without installing the controller.)
Model
|
Dwell-DT20M lift access controller
|
Apply to
|
WGaccess management software
|
Card capacity
|
20000 cards
|
Log capacity
|
100000 records
|
Communications
|
TCP/IP
|
The largest networking sets
|
unlimited
|
Input
|
1 Wiegand 26 bit (34 bit, etc.) format card reader or other biometric device
|
Packing
|
neutral
|
Circuit board size
|
164 x 106 mm
|
Fire signal input
|
1 way
|
Power supply
|
DC 12 v
|
Model
|
Dwell-DT20K Extension Board
|
Applicable
|
It must work with Dwell-DT20M one-to-more controller, can not work standalone , one Dwell-DT20M controller board can work with two pcs Dwell-DT20K extension panel Max .
|
Output
|
20 ways
|
Packing
|
neutral
|
Circuit board size
|
219 * 115 mm
|